Tankless Water Heater Repair Eugene

Tankless Water Heater Repair Eugene Troubleshooting

Normally, most of the issues that may accompany a tankless water heater, triggering it to need a repair are external factors. Right here are a few of them:

The venting is not correct. The most usual mistake is using normal B-vent, which can swiftly ruin the heat exchanger due to acidic condensation.
Check the gas supply line. Sometimes the supply line is undersized and was just connected to the existing line size. The size specified in the installation manual needs to be made use of.
The gas pressure is not proper. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the model.
The wrong type of gas that is being made use of – natural gas or liquid propane. It is not possible to utilize the non-specified type.
Water flow or temperature variation problems. There are numerous things we will examine to make certain they are working effectively, like cleaning or replacing the input filter, analyzing the check valve, inspecting the seals in the faucets and looking to see if there is a cross flow somewhere that must be repaired.
Hard Water Problems: In areas where the water is really hard, de-scaling will be required regularly.
Environmental problems. The heaters must be set up in a clean location with access to combustion air that is free from dust, lint, grease, or chemicals.

Do not hesitate to contact us of any problems you are having with your tankless hot water heater, or if you merely would like some information on determining if having one could be a good solution for your home.

Tankless Water Heater Repair Eugene OR

Tankless Water Heater Repair Eugene Oregon

Back to Water Heater Repair Eugene OR

Click Here